View LG-150VY-DT_3034020.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

doc. no : qw0905-lg- 150vy-dt rev. : b date : 20 - jun - 2005 LG-150VY-DT data sheet led smd lead-free parts pb ligitek electronics co.,ltd. property of ligitek only
color yellow algainp LG-150VY-DT material part no emitted white diffused lens features: 1. package in 8.0mm carrier tape on 7" diameter reel. 2. compatible with automatic placement equipment. 3. compatible with reflow solder process. descriptions: 1. the lg-150 smd taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. 2. besides, lightweight makes them ideal for miniature applications. etc. applications: 1. automotive : backlighting in dashboard and switch. 2. telecommunication : indicator and backlighting in telephone and fax. 3. flat backlight for lcd, switch and symbol 4. general use. device selection guide: part no. LG-150VY-DT ligitek electronics co.,ltd. property of ligitek only page 1/10
led die soldering terminal 3.2 2.0 recommended soldering pad dimensions note : the tolerances unless mentioned is ? 0.1mm,angle ? 0.5. unit=mm. note : 1.all dimension are in millimeter tolerance is ? 0.1mm unless otherwise noted. 2.specifications are subject to change without notice. 1.6 1.6 2.0 1.6 0.6 pcb package dimensions ligitek electronics co.,ltd. property of ligitek only 0.6 resin cathode mark 1.6 1.1 0.5 page 2/10 part no. LG-150VY-DT
593 if=20ma nm ---- f p ---- peak wavelength ---- ---- ---- note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. 1.7 spectral line half-width dominant wavelength viewing angle forward voltage 2 c 1/2 v f fd ??f ---- 2.6 140 ---- deg v ---- ---- 590 20 nm nm if=20ma if=20ma if=20ma if=20ma 20 min. typical electrical & optical characteristics (ta=25 j ) luminous intensity items iv symbol storage temperature soldering temperature operating temperature reverse current @5v tsol t opr tstg ir condition max. ---- 50 typ. mcd unit if=20ma max 260 j for 5 sec max -40 ~ +85 -40 ~ +90 10 j j g a ligitek electronics co.,ltd. property of ligitek only absolute maximum ratings at ta=25 j parameter peak forward current duty 1/10@10khz power dissipation forward current pd i f i fp symbol 78 60 30 ratings mw ma ma unit page 3/10 part no. LG-150VY-DT electrostatic discharge v 2000 esd
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( j ) forward voltage@20ma normalize @25 j fig.4 relative intensity vs. temperature ambient temperature( j ) relative intensity@20ma normalize @25 j forward voltage(v) fig.1 forward current vs. forward voltage forward current(ma) forward current(ma) fig.2 relative intensity vs. forward current relative intensity normalize @20ma ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 1.0 1.1 1.2 1.5 2.0 2.5 3.0 80 100 0.8 0.9 -20 -40 40 20 080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 typical electro-optical characteristics curve vy chip fig.6 directive radiation part no. LG-150VY-DT page 4/10 relative intensity@20ma wavelength (nm) 500 0.0 0.5 550 600 650 1.0
5.3 8.00.3 3.38 aluminum moist-proof bag LG-150VY-DT part no. 8.0mm tape,7"reel description polarity packing specifications ?e note : the tolerances unless mentioned is ? 0.1mm,angle ? 0.5. unit=mm. label 4.00.2 1.76 label quantity/reel 3000 devices 1.36 1.5 ligitek electronics co.,ltd. property of ligitek only carrier type dimensions 4.00.2 3.50.2 1.75 2.0 0.23 page 5/10 part no. LG-150VY-DT
??1qlu~a?|3--?q ligitek electronics co., ltd. lot no. : 93000512 bin/hue : p/17 q'ty(pcs) : 3000 pcs part no. : LG-150VY-DT ligitek led bin : luminous intensity hue : dominant wavelength 2.0 - 2.2 : forward voltage 2.0 - 2.2 0.4 0.6 0.8 0.2 reel dimensions label explanation 2.0 ? 0.5 178 ? 1.5 9.0 ? 1.0 12.0 ? 1.0 r 13.5 ? 1.0 0.2 0.6 0.8 0.4 6.0 ? 1.0 page 6/10 part no. LG-150VY-DT
l h w box explanation 1. 5 bag / inner box 2. inner box size : l x w x h 23cm x 8.5cm x 26cm 3. 10 inner boxes / carton 4. carton size : l x w x h 49cm x 46cm x 29cm l h w ligitek electronics co.,ltd. property of ligitek only page 7/10 part no. LG-150VY-DT
5sec 1~5 c/sec reflow soldering should not be done more than two times. 120 sec.max. 3-2 pb-free reflow solder 1~5 c/sec preheat 180~200 c 60 ~ 120 sec 260 c max. 10sec.max above 220 c 60 sec.max. time temp. ( j ) 150 120 240 preheat rising +5 j /sec 120 ~ 150 j 3-1. lead reflow solder 120 ~ 180 sec preheat cooling -5 j /sec 245 ? 5 j within 5 sec soldering heat max. 260 j ligitek electronics co.,ltd. property of ligitek only 1. hand solder basic spec is ?? 280 j 3 sec one time only. recommended soldering conditions 2. wave solder page 8/10 part no. LG-150VY-DT
page 9/10 ligitek electronics co.,ltd. property of ligitek only (a) recommended circuit. (b) the difference of brightness between led could be f ound due to the vf-if characteristics of led. esd(electrostatic discharge): static electricity or power surge will damage the led. use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. drive method: led is a current operated device, and therefore, require r some kind of current limiting incorporated into the driver circuit. this current limiting typically takes the form of a current limiting resistor placed in series with the led. consider worst case voltage variations than could occur across the current limiting resistor. the forwrd current should not be allowed to c hange by more than 40 % of its desired value. cleaning: use alcohol-based cleaning solvents such as isopropyl alc ohol to clean the led. precautions for use: storage time: 1.the operation of temperatures and rh are : 5 j ~35 j ,rh60%. 2.once the package is opened, the products s hould be used within a week. otherwise, they should be kept in a damp proof box with descanting agent. considering the tape life, we suggest our customers to use our pr oducts within a year(from production date). 3.if opened more than one week in an atmos phere 5 j ~ 35 j ,rh60%, they should be treated at 60 j? 5 j fo r 15hrs. led circuit model a led circuit model b part no. LG-150VY-DT
1.105 j ~ 25 j ~ - 55 j ~ 25 j 30mins 5mins 30mins 5mins 2.10 cyeles temperature cycling mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1010 jis c 7021: a-4 ir reflow 1.t=260 c max. 10sec.max. 2. 6 min mil-std-750d:2031.2 j-std-020 1.ta=under room temperature as per data sheet maximum rating. 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) test condition 1.t.sol=235 j? 5 j 2.immersion time 2 ? 0.5sec 3.coverage ? 95% of the dipped surface ligitek electronics co.,ltd. property of ligitek only endurance test environmental test 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=1000hrs ? 2hrs high temperature high humidity storage test solderability test thermal shock test 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles high temperature storage test low temperature storage test 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) reliability test: classification operating life test test item mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1011 mil-std-202f: 208d mil-std-750d: 2026 mil-std-883d: 2003 iec 68 part 2-20 jis c 7021: a-2 mil-std-883d:1008 jis c 7021: b-10 jis c 7021: b-12 mil-std-202f:103b jis c 7021: b-11 reference standard mil-std-750d: 1026 mil-std-883d: 1005 jis c 7021: b-1 page 10/10 part no. LG-150VY-DT

▲Up To Search▲

Price & Availability of LG-150VY-DT

	To Download LG-150VY-DT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .